Diagnostic Trouble Code (DTC) Information ECM-9100

Condition 

Fig 1: Identifying Clutch Pedal Push Rod & Position Sensor

Courtesy of VOLVO CARS CORPORATION

The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers a fault in the signal from the clutch pedal position sensor.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute Value 

Cruise control switched off.

Possible Source 

• Open-circuit in the signal cable
• Incorrectly installed clutch pedal sensor
• Damaged clutch pedal sensor.

Fault symptom[s] 

• Cruise control does not function at all.