Diagnostic Trouble Code (DTC) Information ECM-432D

Condition 

Fig 1: Identifying Leak Diagnostic Pump

Courtesy of VOLVO CARS CORPORATION

The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that the signal from the valve in the pump for the leak diagnostic is too low when the valve is activated.

The diagnostic trouble code (DTC) can be diagnosed when the leak diagnostic system is run.

Substitute Value 

• The leak diagnostic is disabled.

Possible Source 

• Short-circuit to ground in the signal cable.

Fault symptom[s] 

• Malfunction indicator lamp (MIL) lit.