Diagnostic Trouble Code (DTC) Information ECM-2A0B
Condition
The engine control module (ECM) checks the signal from the fuel temperature sensor. The fuel temperature sensor is integrated in the fuel pressure sensor. The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that there is no signal from the fuel temperature sensor.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.
Substitute Value
- None.
Possible Source
- Contact resistance or oxidation in the terminals
- Short-circuit to supply voltage in the signal cable
- Short-circuit to ground in the signal cable.
- Open-circuit in the signal cable
- Open-circuit in the signal ground cable
- Damaged fuel temperature sensor.
Fault symptom[s]
- None.