Diagnostic Trouble Code (DTC) Information ECM-290D
Condition
The engine control module (ECM) controls the fuel pressure via the fuel pump (FP) control module using a pulse width modulation (PWM) signal. The fuel pump (FP) control module then controls the fuel pump (FP) depending on the pressure requested by the engine control module (ECM). The diagnostic trouble code (DTC) is stored if the actual pressure (measured pressure from the fuel pressure sensor) is too low in comparison with the requested pressure (target pressure) during a certain time frame.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running.
Substitute Value
- None.
Possible Source
- Leakage at the fuel lines
- Damaged fuel pressure sensor
- Damaged fuel pump
- Damaged fuel pump control module.
Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- Deterioration in performance
- The engine stops.
- Starting/Engine does not start/Engine turns