Diagnostic Trouble Code (DTC) Information ECM-1410

Condition 

The diagnostic trouble code (DTC) is stored if the outside temperature sensor signal is higher than the calculated signal.

The diagnostic trouble code (DTC) can be diagnosed after 5 minutes driving at an engine speed above 1700 RPM and a speed above 50 km/h.

Substitute Value 

• The value from the engine intake air temperature (IAT) sensor.

Possible Source 

• Contact resistance in the terminals
• Damaged outside temperature sensor
• Damaged intake air temperature (IAT) sensor.

Fault symptom[s] 

• Malfunction indicator lamp (MIL) lit.