Checking The Direction Indicator Shunt
- Ignition off.
Check that the shunt for the left/right direction indicator is fitted correctly.
At the same time check the connection:
Diagnostic trouble code CEM-8F02
in particular 20/32 3
Diagnostic trouble code CEM-8F03
in particular 20/34 3
for a short circuit to ground as described in, see SHORT-CIRCUIT TO GROUND, PERMANENT FAULTS or an open circuit as described in OPEN-CIRCUIT, PERMANENT FAULTS .
Additional information:
- To replace shunt:
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- To replace shunt:
Is there a fault?
- YES
Refer to VERIFICATION
- NO
Refer to REPLACING THE COMPONENT