Checking The Brake Light Wire
- Ignition off.
After it has cooled, check the wire between central electronic module (CEM) 5B and high level brake light (10/19) 5 for a short circuit to ground as described in, see SHORT-CIRCUIT TO GROUND, PERMANENT FAULTS . Also check connector 54/13 11.
Additional information:
- For information on the central electronic module (CEM) connector:
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- To connect the test box, see CONNECTING THE BREAKOUT BOX .
- -2004: SIGNAL SPECIFICATION
- 2005-: SIGNAL SPECIFICATION
- For information on the central electronic module (CEM) connector:
- Continue
Refer to VERIFICATION