Checking Components And Wiring

Check the microphone signal cable between phone module (PHM) connector B terminal #13 (#55) and handset connector terminal #1 (#21). Check for an open-circuit and for a short-circuit to supply voltage.

Try replacing the carphone handset if no fault is found in the wiring.

Remedy as necessary.

Other information: 

• To connect the breakout box, see CONNECTING THE BREAKOUT BOX
• For information about signals and connectors, see SIGNAL SPECIFICATION
• To access or replace the control module, see PHONE MODULE (PHM), REPLACING
• To access or replace the handset, see HANDSET, REPLACING
• see CHECKING WIRING AND TERMINALS .

Fig 2: 10 CD Changer Connector Terminals

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Ohm Meter

Courtesy of VOLVO CARS CORPORATION

See: VERIFICATION