Checking Components And Wiring
Check the resistance of the outside temperature sensor.
Check the signal cable between control module terminal #B29 (#B39) and outside temperature sensor terminal #2. Check for a short-circuit to ground.
HINT: With the ignition on and the outside temperature sensor connector disconnected, the voltage between #2 and the ground terminal must be approximately 5V.
Remedy as necessary.
Other information:
- To connect the breakout box / access the control module, see CONNECTING THE BREAKOUT BOX
- For outside temperature sensor - 2006 see OUTSIDE TEMPERATURE SENSOR DOOR MIRROR, REPLACING
- For outside temperature sensor 2007 - see OUTSIDE TEMPERATURE SENSOR
- For resistance values, see COMPONENT SPECIFICATIONS
- For 5 cylinder turbocharged engines -2004, see SIGNAL DESCRIPTION
- For 5 cylinder turbocharged engines 2005-, see SIGNAL SPECIFICATION .
- For 6 cylinder engines -2004, see SIGNAL SPECIFICATION
- For 6 cylinder engines 2005-, see SIGNAL SPECIFICATION .
- Continue
Refer to VERIFICATION