Installing The Control Module: Finishing

Program in the data read off from the old control module (customer-programmed data for example). This is performed via VIDA vehicle communication.
Reset the service reminder indicator (SRI). Otherwise the lamp will receive incorrect reference data. (Global time is reset when the central electronic module (CEM) is replaced.) Reset the service reminder indicator (SRI) according to RESETTING THE SERVICE REMINDER INDICATOR (SRI)
Check that the control area network (CAN) is functioning. This is done by reading off the control module ID for the central electronic module (CEM), rear electronic module (REM) and engine control module (ECM) via VIDA vehicle communication.