Connecting The Breakout Box

Special tools:

Fig 1: Breakout Box

Courtesy of VOLVO CARS CORPORATION

Ignition off
Remove fuses 11C/21, 11C/25 and 11C/32 from the fusebox in the passenger compartment
Expose the central electronic module (CEM):
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .

Connect adapter see 9511503 to the control module connector. Connect breakout box see 9511428 to the adapter.

Disconnect the breakout box in reverse order.

NOTE: Before the control module can be checked and measurements taken, the removed fuses must first be installed.

For further information about signals and other values, see SIGNAL SPECIFICATION .