Modifying The Front Base Plate For The Belts

Fig 1: Identifying Distance B

Courtesy of VOLVO CARS CORPORATION

Make markings for the center of the holes according to the following graphics.

HINT: Use a straight tool against the edge to facilitate measuring. 

B = 760 mm, measure from the left edge.

Fig 2: Identifying Distance C

Courtesy of VOLVO CARS CORPORATION

C = 75 mm, measure from the front edge.

Fig 3: Identifying Distance D And E

Courtesy of VOLVO CARS CORPORATION

D = 100 mm, measure from the marking for the first hole center.

E = 75 mm, measure from the front edge.

Cut out two 50 mm circular holes.