Checking Input Signal

Read off the value for Hall sensor 1.

The value should not change when the seat is not affected.

HINT: If the value counts up or down there may be a fault in the sensor, an intermittent short-circuit to supply voltage or an internal fault in the power seat module (PSM). 

Remedy as necessary.

Other information: 

• To access Hall sensor 1, see FRONT-REAR ADJUSTMENT MOTOR .
• To connect the breakout box, see CONNECTING THE BREAKOUT BOX, POWER SEAT MODULE (PSM) .
• For information on signals, refer to SIGNAL SPECIFICATION, POWER SEAT MODULE .

Fig 1: Breakout Box

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION