Checking Supply

Check passenger compartment fuse 4 (11C/4:2)

Check the cable between the power seat module (PSM) terminal #A1 and passenger compartment fuse 4 (11C/4:2). Check for contact resistance and oxidation. See CONTACT RESISTANCE AND OXIDATION .

If the fuse has blown fault-trace for an intermittent short-circuit to ground. See SHORT-CIRCUIT TO GROUND, INTERMITTENT FAULTS

Check the connector

Check passenger compartment fuse 24 (11C/24:2)

Check the cable between power seat supply relay (2/29) #3 and passenger compartment fuse 24 (11C/24:2). Check for an intermittent short-circuit to ground. See SHORT-CIRCUIT TO GROUND, INTERMITTENT FAULTS . Check for contact resistance and oxidation. See CONTACT RESISTANCE AND OXIDATION .

Check that the relay is not is defective.

Check the cable between the power seat module (PSM) #B1 and power seat supply relay (2/29) #1. Check for an intermittent short-circuit to ground. See SHORT-CIRCUIT TO GROUND, INTERMITTENT FAULTS . Check for contact resistance and oxidation. See CONTACT RESISTANCE AND OXIDATION .

Remedy as necessary.

Other information: 

• To connect the breakout box, see CONNECTING THE BREAKOUT BOX, POWER SEAT MODULE (PSM)
• For information about signals, see SIGNAL SUPPLY .

Was a fault detected? 

• YES 

  Refer to INFORMATION 

• NO 

  Refer to REPLACING THE COMPONENT