Connecting The Breakout Box

Fig 1: Breakout Box. Accessory Electronic Module

Courtesy of VOLVO CARS CORPORATION

Ignition off
Remove the fuse for the infotainment control module (ICM) from the fusebox in the passenger compartment
Expose the infotainment control module (ICM).

Connect adapter see 9511508 to the control module connector. Connect breakout box see 9511428 to the adapter.

Disconnect the breakout box in reverse order.

NOTE: Before the control module can be checked and readings taken, the removed fuses must first be re-installed.

Other information

To access and remove the infotainment control module (ICM), see INFOTAINMENT CONTROL MODULE (ICM), REPLACING
For further information about signals and other values, see SIGNAL SPECIFICATION