Checking The Ignition Switch

• Click on the VCT2000 (Volvo Scan Tool) symbol.
• Check that the status of the ignition switch corresponds to all key positions.

  Compare with table in link below.

Other information 

• For table, see:

  see DESCRIPTION OF SWITCH FOR START CONTROL UNIT (SCU) 

Fig 1: Identifying VCT2000 (Volvo Scan Tool) Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Are all key positions OK? 

• YES 

  Refer to FAULT-TRACING INFORMATION 

• NO 

  Refer to CHECKING THE WIRING