Faulty Signal (2008-2013): Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Click the VCT2000 (Volvo Scan Tool) symbol to activate and deactivate the relay.

  A click should be heard from the relay.

  Check that the function is OK.

  Fig 3: Identifying VCT2000 (Volvo Scan Tool) Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION