Technical Contents

Graphics in the information may be reused from previous models and may therefore deviate as regards the background's motif. The technical content relevant to the operation is, however, always correct.

Screws coated with friction-generating or sealing elements as well as lock nuts, or screws used with lock nuts, shall always be replaced with new ones unless the instructions specify reuse of the original screw or nut.

Screw or nut that has been angle-tightened shall always be replaced with a new one.

Gaskets and O-rings shall always be replaced unless the instructions specify reuse of the original gasket or O-ring.

Drained fluids must not be reused, unless otherwise indicated in the method.

A new decal shall always be affixed after replacement of a component with safety decal. No decals may be painted or permanently covered in any other way.

The instruction shall contain all necessary information to perform the operation in way that assures quality and prevents personal injury, or should contain links to such information.

All tools and equipment used in the instructions are included in Volvo's aftermarket standard (A10 - Tools, Equipment & Information). (E10=English, A10=Swedish).

If the spare part is a repair kit, the entire contents of the kit shall be used.