Check The Diagnostic Trouble Codes (DTCS) For Text Id 162

Fig 1: Identifying Ignition In Position II

Courtesy of VOLVO CARS CORPORATION

Note that this text message is displayed together with:

• Incorrect key
• New key.
• Replace the central electronic module (CEM).

Clilck on the VCT2000 symbol in VIDA (Volvo scan tool).

Check if any of the following diagnostic trouble codes have been generated in the vehicle.

Remedy as necessary.

1. CEM-6C41.

   Refer to FAULT-TRACING INFORMATION 

2. CEM-6C42.

   Refer to DOWNLOADING NEW SOFTWARE 

3. CEM-6C43.

   Refer to DOWNLOADING NEW SOFTWARE 

4. CEM-DD11 (A).

   Refer to CHECKING THE CONNECTOR 

Other diagnostic trouble codes that may be stored in the control modules in the vehicle are not relevant for this text message.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION