Checking The Wiring

Check the signal cable between Central electronic module (CEM) terminal #G21 (#21) and clutch pedal position sensor connector terminal #2. Check for a short-circuit to ground.

Check the signal cable between Central electronic module (CEM) terminal #G22 (#22) and accelerator pedal position sensor connector terminal #1. Check for a short-circuit to ground.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX, CENTRAL ELECTRONIC MODULE (CEM)
• see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM)
• see CONTROL MODULE RELAY BOX PASSENGER COMPARTMENT
• see CHECKING WIRING AND TERMINALS

Fig 1: Identifying 2-Bit Connector

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying 6-Bit Connector

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION