Faulty Signal: Information: Overview

The immobilizer function is integrated in the central electronic module (CEM).

This diagnostic trouble code (DTC) indicates that the immobilizer code does not match between the engine control module (ECM) and the central electronic module (CEM). This may be because:

• The immobilizer code in the engine control module (ECM) is incorrect i. e. the code does not match that stored in the central electronic module (CEM)
• The immobilizer code in the central electronic module (CEM) is incorrect.
• The engine control module (ECM) is damaged.

HINT: Reading diagnostic trouble codes (DTCs) in the central electronic module (CEM) 

Other information 

• see SIGNAL SPECIFICATION
• see ENGINE CONTROL MODULE (ECM)

• Continue 

  Refer to VERIFICATION