Explanation Of Dimensions

Fig 1: Body Dimension Measuring Point Symbols

Courtesy of VOLVO CARS CORPORATION

The dimensions in the table are listed as follows:

Symbol number 1 means that the measurement is taken from the center.

Symbol number 2 means that the measurement is taken from one edge.

Courtesy of VOLVO CARS CORPORATION

Symbol number 3 means that the measurement is taken from a cut mark. Measurements are taken from the bottom of the recess as shown.

If only one measuring point symbol is displayed, the symbol applies to both measuring points. Otherwise the symbols are shown on each side of the dimension shown.

Fig 2: Front Side Member And Related Bracket Position Measurement Locations (1 Of 10)

Courtesy of VOLVO CARS CORPORATION

A6 = 1266 mm

A7 = 1419 mm

A8 = 1409 mm

Fig 3: Front Side Member And Related Bracket Position Measurement Locations (2 Of 10)

Courtesy of VOLVO CARS CORPORATION

A9 = 1314 mm

Weld join A10 = 1070 mm

A11 = 1119 mm

Fig 4: Front Side Member And Related Bracket Position Measurement Locations (3 Of 10)

Courtesy of VOLVO CARS CORPORATION

B1 = 862 mm

B2 = 1066 mm

B3 = 1163 mm

Fig 5: Front Side Member And Related Bracket Position Measurement Locations (4 Of 10)

Courtesy of VOLVO CARS CORPORATION

B4 = 889 mm

B5 = 1247 mm

Fig 6: Front Side Member And Related Bracket Position Measurement Locations (5 Of 10)

Courtesy of VOLVO CARS CORPORATION

A12 = 50 mm

A13 = 18 mm

Fig 7: Front Side Member And Related Bracket Position Measurement Locations (6 Of 10)

Courtesy of VOLVO CARS CORPORATION

A16 = 230 mm

A17 = 132 mm

Fig 8: Front Side Member And Related Bracket Position Measurement Locations (7 Of 10)

Courtesy of VOLVO CARS CORPORATION

A18 = 10 mm

A19 = 150 mm

Fig 9: Front Side Member And Related Bracket Position Measurement Locations (8 Of 10)

Courtesy of VOLVO CARS CORPORATION

A14 = 5 mm

A15 = 165 mm

Fig 10: Front Side Member And Related Bracket Position Measurement Locations (9 Of 10)

Courtesy of VOLVO CARS CORPORATION

A20 = 102 mm

A21 = 31 mm

Fig 11: Front Side Member And Related Bracket Position Measurement Locations (10 Of 10)

Courtesy of VOLVO CARS CORPORATION

A22 = 510 mm

A23 = 35 mm