Transmission Oil Cooler And Output Speed Sensor - Removal, Installation, And Flushing

• Transmission
  • Oil Cooler, Flush Cleaning
    • Notes
    • Preparations
    • Connecting Components To The Vacuum Extractor
    • Detaching And Installing The Upper Oil Hose And Pipe
    • Flushing
    • Removing And Installing The Existing Oil Hoses
  • Oil Grade, Checking (Aw50/51 AWD; Aw55-50/51SN)
    • Check The Oil
  • Oil Grade, Checking (TF-80SC; TF-80SC AWD)
    • Notes
    • Check
      • Checking Oil
  • Oil Level, Checking
    • Notes
    • Conditions
    • Preparing To Check The Oil Level
    • Move The Gear Selector Through All Positions. Wait In Each Position For Approximately 3 Seconds
    • Low Level (Topping Up)
      • Top Up With Oil Through The Dipstick Pipe
    • High Level (Overfilling)
      • Notes
      • Drain Off Oil
  • Output Speed Sensor Transmission, Replacing
    • Notes
    • Preparatory Work
      • Removing The Wheels And Components
    • Removal
      • Removing Engine Compartment Components
      • Removing The Screw Holding The Bracket For The Heated Oxygen Sensors (Ho2S)
      • Removing The Sensor
    • Installation
      • Installing The Sensor
      • Connect The Connector. Secure The Connector To The Holder
    • Finishing
      • Installing And Checking Components