Replacing The Component
- Ignition off.
The control module has registered an internal fault.
NOTE:A new control module is delivered without software. The control module must be programmed when it has been replaced.
Other information:
- Replacing the driver's side door module. See DRIVER DOOR MODULE (DDM), REPLACING
- Replacing the passenger side door module. See PASSENGER DOOR MODULE (PDM), REPLACING .
After replacing the control module the window position must be initialized.
Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window.
From model year 2003 inclusive, the window will lower approximately 10 centimeters and then close again during initialization.