Signal Missing: Verification: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on for at least 12 seconds.
Obtain the ID of the Remote Digital Audio Receiver (RDAR) by clicking on the VCT2000 symbol. Also check that the current diagnostic trouble code (DTC) is not detected again after the Infotainment control module (ICM) has been active for at least 75 seconds.
Can the control module ID be read out?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
See: INFORMATION