LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2012 >> XC90 Base, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Steering - Removal, Replacement And Installation >> Steering Wheel, Steering Wheel Lock, Steering Column, Shaft (2003-2004) >> Steering Wheel Angle Sensor Module (SAS), Replacing >> Installing >> The Control Module

The Control Module

Fig 1: Identifying Control Module Cable In Holder
GLL103217Courtesy of VOLVO CARS CORPORATION

Install the cable in the holder for the control module. Press the connector into place.

Reinstall the control module. Press the module into place until there is an audible click.

To install, reverse the removal procedure.