Checking The Wiring
Check the cable between injector terminal 2 and control module:
- terminal #A16 (ECM 2310)
- terminal #A15 (ECM 2320)
- terminal #A33 (ECM 2330)
- terminal #A32 (ECM 2340)
- terminal #A34 (ECM 2350)
- terminal #A14 (ECM 2360).
Check for an intermittent short-circuit to ground.
Other information
- To connect the breakout box / access the control module, see CONNECTING THE BREAKOUT BOX
- For B5xx4T, see INJECTOR/PULSE DAMPER, REPLACEMENT
- For B6xx4T, see INJECTOR / PULSATION DAMPER, REPLACING .
- For 6 cylinder engines -2004, see SIGNAL SPECIFICATION
- For 6 cylinder engines 2005-, see SIGNAL SPECIFICATION .
- see CHECKING WIRING AND TERMINALS .
- Continue
Refer to INFORMATION