Intermittent Fault
Check the cable between the sun roof module (SRM) terminal #6A and the upper electronic module (UEM) terminal #8A. Check for an intermittent open-circuit.
Replace the cable if a fault is found.
If no fault was found, try replacing the sun roof module (SRM).
Other information:
- For further information about signals and other values, see SIGNAL DESCRIPTION, UPPER ELECTRONIC MODULE (UEM)
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- To access or replace the sun roof module (SRM) connector, see CONTROL MODULE, SUN ROOF, REPLACING
- see CHECKING WIRING AND TERMINALS .
- Continue
Refer to INFORMATION