Calibrating The Component

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

NOTE:

If the vehicle is equipped with Four-C, calibration must be carried out via suspension module (SUM).

Check that the position sensor for the Bi-Xenon lamps is correctly installed.

Someone must sit in the driver's seat during calibration. The person must weigh at least 75 kg. Ensure that the vehicle is unladen and is on a flat surface.

Calibrate the position sensor for the Bi-Xenon lamps again.

Ignition on
Calibrate the position sensor using the VCT2000 (or appropriate scan tool).

Other information

see POSITION SENSOR BI-XENON LAMPS, REPLACING

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Continue
Refer to VERIFICATION