Climate Units: Accumulator: Installation

NOTE:

For tightening torques, see: TIGHTENING TORQUE .

INSTALLING RECEIVER

Fill the recommended volume of compressor oil. See: AC-SYSTEM, OIL, REFILLING .

NOTE:

Install the receiver within 5-10 minutes of the plugs having been removed. This prevents the absorbent material absorbing moisture from the air.

Install:

the receiver together with 3 M8 screws. Tighten
the pipe couplings, 2 x M8. Make sure the O-rings are securely located. Tighten the screws
the M8 nut below the fender liner. Tighten
the fender liner together with the plastic nut and the retaining clip.