Engine Control Module (ECM) [2014-2015, B4204T10 | 2014-2017, B4204T11; B4204T9 | 2014-2016, B4204T12]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
CAUTION:
This component is sensitive to "mechanical stresses". If the component has been dropped onto the floor, for example, it must not be installed in a vehicle.
Remove the plenum cover, refer to: PLENUM COVER
NOTE:
Make sure that the component terminals are not bent or damaged.
Disconnect the connectors.
Torque: M6, 10Nm