Removing the ABS control module
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Switch off the switch.
Remove
- the engine coolant hoses from the clamps.
- the clamp above the control module.
Remove the bracket for the brake pipe from the inside of the fender.
Clean the control module thoroughly.
Disconnect the control module connector.
Remove the two bolts and the support at the front. Remove the rubber components.
Twist the control module from the fender liner. Remove the four bolts from the control module.
Remove the central bolt.
Carefully remove the control module.