Signal Outside Its Permitted Range: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reconnect the connectors, components, etc.
• Ignition on
• Read off the status of the stop lamp switch or the value of the pedal position sensor.

  Depress and release the brake pedal. The status must switch between OFF and ON and the value must change.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Does the value change? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION