Faulty Signal: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on
• Read off the oil temperature for the transmission control module (TCM).

  Check that the oil temperature is within its permitted range. Compare it to the automatic transmission temperature.

  NOTE:

  The transmission temperature sensor is located inside the control system and may be affected by the heat given off by the solenoids.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION
  Fig 4: Identifying Transmission Control Module

  Courtesy of VOLVO CARS CORPORATION

Is the temperature OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION