Slips Or Does Not Engage: Verification: Verification
WARNING: This page is about a different variant/trim than selected.
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the components, reconnect the connectors etc.
- Ignition on.
Test drive the car according to: TEST DRIVE SCHEDULE, DESCRIPTION
Check that the transmission does not display any obvious mechanical faults.
NOTE:When test driving, the oil temperature must be above 20 °C.
Was the function OK?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to INFORMATION