Faulty Signal: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reconnect the connectors, reinstall components etc.
• Ignition on.

  Read off the status from the stop lamp switch.

  Check the function of the stop lamp switch by carefully pressing and releasing the brake pedal.

  Check that the status changes between "OFF" when the brake pedal is unaffected and "ON" when the brake pedal is depressed.

  If the status of the stop lamp switch changes as described above when the brake pedal is depressed, the fault has been remedied.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION