Body Side Inner: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Installing components

When welding body components, see WELDING, GENERAL .

For material information, see SHEET METAL, MATERIAL INFORMATION .

Fig 1: Body Side Inner Weld Specifications And Locations (1 Of 4)

GLL152507

Courtesy of VOLVO CARS CORPORATION

Install:

inner body side as shown in the illustration
the wheel arch. See: WHEEL ARCH REAR
outer rear fender, see FENDER
components, see SIDE SECTION, EXPOSING and REAR SECTION, EXPOSING (2006) , REAR SECTION, EXPOSING (2007) , or REAR SECTION, EXPOSING (2008-2012)

Fig 2: Body Side Inner Weld Specifications And Locations (2 Of 4)

GLL152508

Courtesy of VOLVO CARS CORPORATION

Fig 3: Body Side Inner Weld Specifications And Locations (3 Of 4)

GLL152509

Courtesy of VOLVO CARS CORPORATION

Fig 4: Body Side Inner Weld Specifications And Locations (4 Of 4)

GLL152510

Courtesy of VOLVO CARS CORPORATION

Sealing and rustproofing

Seal. See: BODY SEAL, SEALING DIAGRAM .

Rustproof. See: RUSTPROOFING