Comparison Fault (2007): Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reconnect the connectors, reinstall components etc.
• Ignition on.

  Read off the movement of the accelerator pedal by carefully depressing and releasing the accelerator pedal (AP).

  Check that the values for the PWM signal and the analog signal change with accelerator pedal movement. The values must follow each other and be between 5 % (released pedal) and a maximum of 90 % (fully depressed pedal). The function is OK if the values are within this range and follow each other with the pedal movement.

  The fault has been remedied if the function is OK.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

  Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION