Checking The Connectors And Hose Connector

Check the hose connectors on the intake manifold for damage and leakage.

Check the connector and terminals on the pressure sensor. Check for contact resistance. Check for oxidation.

Remedy as necessary.

Other information 

• see MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
• see CONTENTS

Fig 1: Identifying 3-Bit Connector

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Ohm Meter

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Manifold Absolute Pressure (MAP) Sensor

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION