LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2010 >> XC90 R-Design, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control Module (ECM) Diagnostic Trouble Codes - 1 Of 13 >> ECM-125D: Boost Pressure Sensor. Signal Too Low (B5254T2; 2005-2007) >> Signal Too Low / Signal Too High >> Verification >> Verification

Signal Too Low / Signal Too High: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON
GLL101051Courtesy of VOLVO CARS CORPORATION
Fig 2: Connecting Connector
GLL101069Courtesy of VOLVO CARS CORPORATION

Is the difference between the pressure sensors less than 140 hPa?