Signal Too Low. Permanent Fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS CORPORATION

Fig 2: Connecting Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off.
• Reconnect the connectors, reinstall components etc.
• Start engine and run to normal operating temperature.
• Rev the engine to 3500 RPM and read off the value of the knock sensor (KS) signal.

  .

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION
  Fig 4: Identifying Knock Sensor

  Courtesy of VOLVO CARS CORPORATION

Is the value between 2-6? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION