Signal Too Low: Verification: Verification
WARNING: This page is about a different variant/trim than selected.
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the components, connectors, etc.
- Ignition on
- Gear selector in position P
- Try moving the gear selector to another position without depressing the brake pedal. It should not be possible to move the gear selector
- Depress the brake pedal and try moving the gear selector to another position. It should now be possible to move the gear selector.
Was the function OK?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to INFORMATION