Faulty Signal: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS CORPORATION

Fig 2: Connecting Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Start the engine. Allow the engine to idle for 1 minute. Increase the engine speed (RPM) to approximately 5100 RPM for at least 1 second. The car must then be driven at a speed of more than 50 km/h.
  NOTE:

  The above instructions must be followed and carried out in the specified order.

• Read off the status of the diagnostic trouble code (DTC).

  The fault has been remedied if status of the diagnostic trouble code (DTC) is intermittent.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the status of the diagnostic trouble code (DTC) intermittent? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION