Checking For Open-Circuits And Short-Circuits
Check that the fuses in the fusebox in the passenger compartment are intact.
Check the cable between control module terminal #21 and siren terminal #2. Check for a short-circuit to ground. Check for an open-circuit. Check for a short-circuit to supply voltage.
Check the wiring from the fuse in the passenger compartment to siren connector terminal #1. Check for an open-circuit. Check for a short-circuit to ground.
Other information:
- For further information about signals and other values, see SIGNAL DESCRIPTION, UPPER ELECTRONIC MODULE (UEM)
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- see SIREN, REPLACING
- see CHECKING WIRING AND TERMINALS .
Remedy as necessary.
Was a fault detected?
- YES
see VERIFICATION
- NO