Intermittent Fault
Check the connectors for the control module and power window lift motor. Check for contact resistance and oxidation. Check for loose connections.
Check the cable between control module terminal #24A and power window motor terminal #2. Check for an intermittent short-circuit to ground. Check for an intermittent short-circuit to supply voltage. Check for an intermittent open-circuit.
Other information:
- When raising or lowering the window, the voltage between power window lift motor terminal #2 and ground must be 2.4 V
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- For further information about signals and other values, see SIGNAL SPECIFICATION
- To access the window lift mechanism, see WINDOW LIFT MECHANISM FRONT SIDE DOOR, REPLACING
- see CHECKING WIRING AND TERMINALS .
- Continue
Refer to INFORMATION