Diagnostic Trouble Code (DTC) Information TVM-B1D5513

Condition

Fig 1: Identifying Television Module (TVM)

Courtesy of VOLVO CARS CORPORATION

The Television Module (TVM) checks the antenna's voltage.

The diagnostic trouble code (DTC) is stored if the control module detects that:

Voltage too low

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

Activated control module.

NOTE:

The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute Value

None.

Possible Source

Open circuit or loose connection in the cable between the antenna and Television Module (TVM).

Fault symptom[s]

TV/TV reception poor/does not work