CCM-B10874A: Lin Bus A. System Internal Failures. Incorrect Component Installed (2012): Fault-Tracing: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

• Read off the diagnostic trouble codes (DTCs) by clicking on the VCT2000 (Volvo Scan Tool) symbol.

  Check that the relevant diagnostic trouble code (DTC) has switched status from permanent to intermittent fault.

  Also check that no diagnostic trouble codes (DTCs) have been stored in connection with identifying the damper motors. Remedy by fault-tracing the relevant diagnostic trouble code (DTC).

  Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Has the status of the diagnostic trouble code (DTC) changed? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION