Checking The Control Module

Fig 1: Checking Traffic Load On CAN Cables

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reconnect the connectors, reinstall components etc.
• Ignition on.
• Turn the steering wheel to the limit position in both directions.
• Read off diagnostic trouble codes (DTCs).

If the diagnostic trouble code (DTC) is intermittent, this means that the cause of the fault has been found. If the fault is permanent, replace the control module.

Other information 

• see STEERING WHEEL CONTROL MODULE

Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  see: INFORMATION