Diagnostic Trouble Code (DTC) Information ECM-A13C

Condition

NOTE:

This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

Engine control module (ECM) registers internally if the vehicle has been involved in a collision. If the control module detects that Central electronic module (CEM) sends internal signals that a collision has occurred, the diagnostic trouble code is generated.

NOTE:

The diagnostic trouble code must be erased like a normal diagnostic trouble code, even if fault-tracing is not carried out.

The diagnostic trouble code (DTC) can be diagnosed at key position II.

Substitute Value

Nothing.

Possible Source

This diagnostic trouble code (DTC) is not caused by a fault that needs to be remedied.

Fault symptom[s]

Engine is difficult to start
Malfunction indicator light (MIL), on
Message in information display