Diagnostic Trouble Code (DTC) Information
Condition
The driver/passenger door module (DDM/PDM) both sends and receives information via a standardized serial communication method - LIN (Local Interconnect Network). The following components communicate on LIN bus 2:
- Left/right camera module (LCM/RCM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal is incorrect.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Fault-trace in transmitting control module.
Fault symptom[s]
- LED does not light